1.8, 2.3 and 4.5 Cubic Yard Stainless Steel Salt/Sand Spreaders

Buy a Spreader Today! Snow Plow Specials

Our 1.8 Cubic yard spreaders are sold with poly, steel or stainless steel hoppers and the 2.3 cubic yard spreader is sold in stainless steel only. The spreader is driven with a 10.5 HP gas engine. Used for spreading salt and sand these ultra-durable spreaders are designed for ice and snow control. Uses an electric throttle control that allows for full-range throttle settings in the cab. The 1.8 cubic yard models are 96"long and the 2.3 cubic yard models are 120" long. Can be ordered with the standard length spinner chute or the extended spinner chute. Inverted vee and top screens are included with unit.

The large 4.5 cubic yard spreaders are designed for dump bodies and flat bodies with a GVW of 15,000 to 20,000 pounds. You can order one of these spreader that use hydraulic drive or a 10-1/2 HP gas engine. They will spread material from 4 foot to 30 foot in width. The material hopper is made of 12 gauge 304 stainless steel with continuously welded seams. All hopper sides are formed with a continuous "J" channel profile for added rigidity and strength. Hopper walls are sloped at a 45 degree angle to keep material flowing. Has a strong 4-section hinged top grate. The conveyer is 12-1/2" wide all steel pintle chain with all parts replaceable including the 10 gauge stainless steel inverted vee that sits over the conveyer. The bolt on spinner housing and chute has two adjustable internal baffles. The polyurethane spinner is 18" in diameter and 3/4" thick for durability. If you go with the hydraulic drive unit it comes with 2 independent hydraulic motors rated 15 GPM at 1500 psi. The gas powered units use a 10.5 HP Briggs and Stratton engine. Overall length is 108", width:70", and height of 45". We can also quote on spreaders that have material capacities of up to 16 cubic yards. Please call us with your questions.

Buy Your Salt Spreader Now!

Connect With Us

©2013 Mill Supply, Inc. (All Material on this page including but not limited to information about Salt Spreaders is copyright by Mill Supply, Inc. 2013)